Bateria PoweryMax Power Kit PX5

5Ah PoweryMax Power Kit PX5 battery. The revolution in fishing from Duck and Kayak has come from PoweryMax, the first manufacturer in Europe to make reliable, safe and truly portable batteries applicable to all extreme or outdoor sports where electronic devices need to be recharged or powered.

KIT CONTENT:

PoweryMax PX5 Portable Battery. Lightweight, Waterproof, Safety and Durability.
Smart charger.
Device connection cable.
Pair of watert watertrow connectors.
Thermo-retractable cover.
12v. / 5Ah.
Weight: 330 gr.
PoweryMax Px5

Based on a soul of lithium-ion cells of the highest quality, PoweryMax has created this product at the discretion of maximum efficiency and usability with only 330 gr of weight you can carry it anywhere!

Its internal cells and protection system are safe from inclement weather in a fully sealed silicone-based cover wrapped in a portable case that will allow you to carry it without fear of wetting it, its wiring is totally watert watertrows thanks to the use of screwed joints and connectors

Measurements (cm):

Weight (gr) 330 gr
Output voltage (V): 12

Maximum recharge time (h): 6 (this depends on the consumption performed)

How long will I have with my PoweryMax PX5?

This depends on your unit's power consumption, our tests as an example on a Hook2-5 give a performance of more than 15 hours as an example

Calculating the autonomy is easy, divides the capacity by the consumption of your electronic equipment and you will get the hours of use. Consider putting amps (10ah) or milliampere (10,000mah) to do the calculation well.

Recommendations for your PoweryMax PX5.

We recommend using a protective fuse before connecting our device and fully charging the device before use, as well as not leaving it fully charged if we anticipate long periods of inactivity. The charger can be left on even after it has been fully charged as it has a protection system, but it is not advisable to leave it on for long periods of inactivity

It is advisable to clean the connectors after use, especially in salt water, is all we should keep in mind!

PRE-ASSEMBLY INDICATIONS:

Your device must be compatible with Power Kit Battery specifications

Note the polarity, RED (+) and BLACK (-)

The Power Kit Battery must be fully charged before first use.

Mounting

1. Cut the heat shrink strip approx through the center and first of all pass each of the cables through it leaving enough cable to work comfortably.

2. Our connection cable comes pre-peeled leaving part of the end without cover, do the same with the device cable to be connected in about the same length, winding the cable filaments to prevent part from leaving when inserted into the splice connector.

3. Be clear which cable is positive (+) and negative ( –) of the device before moving on to the next point, usually BLACK is (-) and RED (+)

4. Put the stripped wire end at each end of the splice connector ensuring that the central metal inner part touches the ends of both cables, using pliers tighten this central metal part leaving the cables attached to it, once the first one repeats the operation with the other cable.

5. Pass a heat source (a simple lighter is sufficient) from the center out evenly on each of the splice connectors until the tube adapts to the cable and wait for it to cool down before moving on to the next step.

6. Put the shrink piece covering the connector completely and reapply heat to this second layer of protection, leaving the joint completely sealed we avoid moisture inputs that would shorten the life of our Power Battery Kit.

IMPORTANT PRECAUTIONS

Do not follow the instructions for use or assembly properly and may cause damage to the Power Kit Battery, connected equipment or even serious personal injury.

Never use another charger than the one supplied. (danger of damage and/or fire)

Although the Power Battert Kit is moisture resistant, under no circumstances should it be submerged.

The Power Battery's rated delivery capacity is 5A with peaks up to 10A. Making use for higher consumptions could irreversibly damage the Power Battery Kit and even cause damage or fire.

Warranty

Power Battery Kit is guaranteed against manufacturing defects for a period of one year under the Consumer Goods Sale Act 23 of July 10, 2003.
Damage caused by improper use of the product, physical damage or wear and tear due to use is excluded from the warranty.
The durability of this product is calculated in approx 500 charge/discharge cycles.
The use of this product in extreme temperature conditions significantly shortens performance.